Replace Module in E62, E64 or E68 LED Sticks

The Strobes N' More E-Series V.2 LED sticks, including the E62, E64, and E68 models, are designed with user-replaceable modules, allowing for easy maintenance and customization. This guide outlines the process for replacing a module in these LED sticks.

1. Safety Precautions

• Disconnect Power: Ensure the vehicle's battery is disconnected to prevent electrical hazards.
  
• Allow Cooling: If the light has been in use, allow it to cool down before proceeding.
  

2. Tools Required

• Screwdriver (typically Phillips head)
  
• Replacement LED module compatible with E62, E64, or E68 models.
  

3. Removing the Existing Module

• Access the Module: Locate the screws securing the module to the light stick housing.
  
• Unscrew the Module: Carefully remove the screws and set them aside.
  
• Disconnect Wiring: Gently disconnect the module from the internal wiring harness.
  

4. Installing the New Module

• Connect Wiring: Attach the new module to the wiring harness, ensuring a secure connection.
  
• Position the Module: Align the module with the mounting holes on the light stick housing.
  
• Secure the Module: Insert and tighten the screws to hold the module in place.
  

5. Testing the Installation

• Reconnect Power: Restore the vehicle's battery connection.
  
• Test Functionality: Activate the light stick to ensure the new module operates correctly.
  

Conclusion

Replacing a module in the Strobes N' More E-Series LED sticks is a straightforward process, thanks to their user-friendly design. Always refer to the manufacturer's guidelines for specific instructions and safety information.