Skip to content
Call Now: (401) 454-4487   |   Hours: Mon - Fri 8:30 am - 4:30 pm EST   |   Contact Us
Call Now: (401) 454-4487 | Hours: Mon - Fri 8:30 am - 4:30 pm EST | Contact Us
Speed Turtle Easy Flash 3.0 Module

Speed Turtle Easy Flash 3.0 Module

by Speed Turtle Engineering
$249.99
$249.99 - $249.99
$249.99
$199.99
$199.99 - $199.99
$199.99
SKU STE-EFM3-FRD1-SW
Description

Flashers are final sale items and cannot be returned or exchanged

Check out the rest, now buy the best! The Speed Turtle works while the vehicle is moving where the others don't!

The Easy Flash Module 3.0 (EFM 3.0) provides a simple and effective way to flash the factory exterior lights of supported vehicles. The system is easily installed in minutes and is a true plug and play solution.

If equipped and supported, the module will flash the following lights:

  • Front Low Beams
  • Front High Beams
  • Front Turn Signals
  • Front Fog Lamps
  • Front LED Accents
  • Rear Turn Signals
  • Rear Stop Lamps
  • Third / Center Mounted Brake Lamp
  • Reverse Lamps
  • Pickup Bed Lamp

Unlike other solutions, the EFM 3.0 does not require any cutting or reconfiguration of the vehicle's wiring harness. This allows the module to be easily installed by anyone in minutes. The plug and play installation also allows the module to be removed and installed in another vehicle without repairing or replacing vehicle components.

The system works while parked and in motion and utilizes all factory or aftermarket bulbs. Beware of Systems that will not work while in Motion.

The module has two switch inputs as well as an existing vehicle button that can be configured to activate the module either through a long press or quick cycle.

Choose from one of the following switch interface harnesses:

  • Toggle Switch Harness: This harness provides a simple ON/OFF toggle switch with adhesive backing. There are two internal LEDs to the toggle switch. Green indicating the switch is ON and Red Indicates the switch is in the OFF Position. While this is the simplest of the two harnesses to install, it only provides one of the two possible switch inputs. The toggle switch harness is connected to Input 1 on the module.
  • Voltage Input Harness: This harness provides two 'flying lead' input wires. Each wire will accept a 5 – 17 volt input signal from a switch or light controller of your choice. The white wire corresponds to Input 1 and the green wire corresponds to Input 2. This option allows you to use your own aftermarket switch and allows front and rear switching.

Kit includes:

  • Easy Flash Module 3.0
  • Switch interface harness of your choosing
  • 6' micro USB cable
  • Zip ties

Current Supported Vehicles: *If the vehicle is not listed it will not work with said vehicle.

  • Explorer 2016-2019
  • F-150 2015-2019
  • F-250/550 2017-2019
  • Acadia 2017-2022
  • Blazer 2019-2024
  • Canyon 2017-2022
  • Colorado 2017-2022
  • Equinox 2018-2024
  • Malibu 2018-2024
  • Sierra 1500 2017-2021
  • Sierra 1500 LTD 2022
  • Sierra 2500-3500 2017-2023
  • Silverado 1500 2017-2021
  • Silverado 1500 LTD 2022
  • Silverado 2500-3500 2017-2023
  • Suburban 2017-2020
  • Tahoe 2017-2020
  • Terrain 2018-2024
  • Traverse 2018-2023
  • Yukon 2017-2020
  • Escalade 2017-2020

Warranty Info FAQs

Frequently Asked Questions

speed turtle 3.0

What vehicles are compatible with the Speed Turtle 3.0 module?

Speed Turtle 3.0 is compatible with a wide range of vehicles from major manufacturers like Ford, Dodge, Chevrolet, Toyota, Nissan, and GMC. It’s designed to work with vehicles equipped with CAN bus systems, including many police interceptors, pickup trucks, SUVs, and fleet vehicles. Compatibility varies by year and model, so it’s best to check the official compatibility list or use Speed Turtle’s lookup tool.

How does Speed Turtle 3.0 control emergency vehicle lighting?

The module plugs directly into the vehicle’s OBD-II port and communicates with the CAN bus system to control the factory lights—such as brake lights, reverse lights, turn signals, and DRLs—turning them into flashing warning lights. It requires no cutting or hardwiring and can trigger lighting patterns with just a tap of the brake pedal, use of the gear shift, or activation of specific vehicle inputs.

Is Speed Turtle 3.0 easy to install and remove?

Yes. The Speed Turtle 3.0 is a plug-and-play device that installs in seconds via the OBD-II port, with no permanent modifications required. Removal is just as fast, making it ideal for temporary use or vehicles shared between users. It’s a convenient solution for agencies or fleets that rotate vehicles often.

Can the Speed Turtle 3.0 module be used for covert police lighting?

Absolutely. Speed Turtle 3.0 is widely used in unmarked and covert law enforcement vehicles. It allows the use of factory lights for warning functions without visible aftermarket lighting. This helps maintain a clean, low-profile appearance while still providing effective signaling when needed.

Does Speed Turtle 3.0 support multiple flash patterns?

Yes. The module comes with several built-in flash patterns, and users can configure them using Speed Turtle’s software. You can set different patterns for specific vehicle actions (like reverse or park), and even assign activation methods. Some models also support dual-mode operation, allowing two separate flash profiles depending on the situation.

Warranty Info

Easy to follow instructions provided by each manufacturer

Helpful Videos

Installation & troubleshooting tips from our team

Installation Services

Expert service with unmatched reliability and performance

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare